-
-
Vacuum Furnace
-
Tube Furnace
-
Customize Furnace
Heat treatment equipment
-
-
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools
Solution for Ultra Hard Tools
Technical parameter: | |
Model | PT-T1200-W2 |
Tube furnace part: | |
Furnace structure | Double-layer shell structure, equipped with a cold air system to automatically reduce the temperature of the furnace shell does not exceed 45 ℃ |
Furnace material | The high-quality and high-purity alumina polycrystalline fiber curing furnace made by vacuum adsorption formed by Japanese technology has good insulation performance, high reflectivity and balanced temperature field. |
Maximum temperature | 1200℃ |
Working temperature | ≤1100℃ |
Heating rate | Recommended ≤10℃/min, the fastest heating rate is 20℃/min |
Furnace tube material | Quartz tube |
Furnace tube size | OD:50mm*ID:44mm*length 1400mm The middle part of the pipe is opened 15mm, there is a blockage that can be blocked |
Length of heating zone | 200mm+200mm(Double furnace body) |
Furnace opening | Each furnace correspondingly opens a hole with a width of 10mm * a length of 80mm, and can be plugged |
Flange | Stainless steel sealing flange, easy to disassemble, precision needle valve is installed on the flange |
Temperature Control System | The temperature control system adopts artificial intelligence adjustment technology, has PID adjustment and self-tuning functions, and can compile 30 sections of temperature rise and fall programs; 1. Using PID method to adjust the temperature control, 30 sections of temperature rise and fall programs can be set 2. Temperature control accuracy ±1ºC 3. With over-temperature protection and broken couple protection 4. The instrument has the function of temperature self-tuning |
Heating element | Alloy resistance wire |
Temperature measuring element | 2 K-type thermocouples are independently temperature controlled |
Power supply | AC220V,50Hz |
rated power | 4KW |
Inlet and Outlet | The flange contains air inlet and outlet and precision needle valve |
Pneumatic system part: | |
Mass flowmeter | Two-way precision mass flow meter: digital display, automatic gas flow control. MFC1 N2 Range: 0-1000 sccm MFC2 CO2 range: 0-1000 sccm Air way: 2 way Flow accuracy: 0.2% Inlet and outlet ports: 1/4" ferrule Each gas path has an independent stainless steel needle valve control. Adjust the gas flow through the knob on the control panel. |
Standard configuration | 1 host, 1 set of flowmeter, 1 pair of sealing flanges, 1 quartz tube, 4 sealing rings, 2 furnace plugs, 1 crucible hook, 1 pair of high temperature gloves, 2 disassembly wrenches, 1 instruction manual, qualified 1 copy of warranty card |
Heat treatment equipment
Vacuum Furnace
Tube Furnace
Customize Furnace
Solution for Ultra Hard Tools
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools