0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER
Ask for a free consultation Ask for technical support
Product Overview:
This 1600℃ three-temperature zone inclined rotary tube furnace is a CE certified 1600℃ three-temperature zone inclined rotary tube furnace, designed for uniform sintering of powder at high temperature; each temperature zone They are individually controlled by three independent temperature control systems. By adjusting the temperature of each temperature zone, a temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 sections of temperature rise and fall programs can be set, and the B-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.
technical parameter:
|
product name |
1600℃ Three Temperature Zone Inclined Rotating Tube Furnace |
|
Product number |
PT-T1600-L |
|
Shell structure |
Double shell with air cooling system |
|
Furnace material |
Furnace uses alumina polycrystalline fiber |
|
Furnace tube size approximately |
Φ50×1500mm |
|
Heating zone |
Three temperature zone heating, each temperature zone 220mm |
|
Furnace tube material |
Corundum furnace tube |
|
Operating temperature |
1500°C |
|
Maximum temperature |
1600°C |
|
Temperature control method |
Three temperature zones independently control temperature, each zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions |
|
Flange joint |
Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed |
|
Sealing system |
The furnace tube and flange are extruded and sealed with a silicone O-ring, which is easy to disassemble and reassemble, and has good air tightness. Vacuum and atmosphere can be evacuated during rotation. |
|
Heating rate |
0-10℃/min |
|
Heating element |
Silicon molybdenum rod |
|
Operating Voltage |
AC 220/380V 50Hz |
|
Maximum power approx. |
10KW |
|
Temperature measuring element |
3 B-type thermocouples, independent temperature control |
|
Vacuum |
Pre-evacuated to -0.1MPa (value of vacuum pressure gauge) |
|
Accessible atmosphere |
Inert gas (slightly positive pressure) |
|
Provide related accessories |
Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc. |
|
After-sales service |
12-month warranty and lifetime warranty (except vulnerable parts) |
Heat treatment equipment
Vacuum Furnace
Tube Furnace
Box Furnace
Customize Furnace
Accessory For Heating Treatment Equipment
Solution for Ultra Hard Tools
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools
No.26, Dongqing Street, Zhengzhou, China
sitemapLeave A Message
English
简体中文
Français
日本語
한국어
Português
Русский
Español
