-
-
Vacuum Furnace
-
Tube Furnace
-
Customize Furnace
Heat treatment equipment
-
-
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools
Solution for Ultra Hard Tools
Model | PT-GV1900 | |
Max. Temperature | 1900℃ (Higher temperature is available.) | |
Heating Rate | 0-20℃ | |
Heating Element | Graphite | |
Temperature sensor | B-type thermocouple and infrared thermometer | |
Insulation Material | Graphite felt | |
Temperature Accuracy | ±1℃ | |
Power Supply | 110-415V,50/60Hz | |
Vacuum degree | 6.67x10Pa/6.67x10-3Pa | |
Outside tank | Cooled by fans / water | |
Size | ||
Heating Chamber Size mm |
Capacity L |
|
150*150*150 | 3.4 | |
150*150*200 | 4.5 | |
200*200*200 | 8 | |
200*200*300 | 12 | |
300*300*300 | 27 | |
Customization is available! | ||
Optional | Crucible, Touchscreen, Software | |
Notes: | 1, In order to ensure the longest possible service life of furnace parts, we recommend heating rate no higher than 10deg.C/min. 2, Cooling rate no higher than 5deg.C/min. 3, Toxic or explosive gas is not allowed. 4, It is normal that there will be tiny cracks on the wall of the heating chamber, they won’t affect the performance of the furnace, and can be repaired with alumina coating. |
|
Warranty |
One year warranty with life-time technical support. Special notes: 1, Consumables like heating element, quartz, crucible and so on are uncovered. 2, Man-made damage and damage caused by misuse are uncovered. |
Heat treatment equipment
Vacuum Furnace
Tube Furnace
Customize Furnace
Solution for Ultra Hard Tools
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools