-
-
Vacuum Furnace
-
Tube Furnace
-
Customize Furnace
Heat treatment equipment
-
-
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools
Solution for Ultra Hard Tools
Model | PT-T1000-R200 |
Furnace structure | LED |
Continuous working Temperature | ≤1000℃ |
Heating Rate | 0-20℃/min, Suggestion 0~10℃/min |
Temperature Zone | Double |
Heating zone length | 400+400mm, total 800mm |
Tube size | Center diameter 200mm, both sides diameter 80mm |
Heating Element | SiC rods |
Temperature Control Accuracy | ±1℃ |
Tube rotating Speed | 0 - 10RPM variable |
Furnace tilt angle | 0-15° |
Thermocouple | K type |
Max. Power | 15KW(the exactly details according to design) |
Tube material | 310S Stainless steel tube |
Chamber material | Alumina Fiber |
Sealing flange | -Left side flange with KF50 magnetic fluid sealing and outlet valves; -Right side flange with KF25 magnetic fluid sealing and gas inlet valves, mechanical pressure gauge. Limit vacuum degree: -0.1Mpa |
Vacuum pump | Rotary Vane Vacuum Pump Include bellow and fitting for vacuum pump Flow rate:6L/S |
Working Voltage | AC 380v, three- phase, 50 Hz(or according to your requirement) |
Temperature Controller | 30 steps programmable PID digital controllers |
Warranty | One year limited warranty (Consumable parts such as heating elements are not covered by the warranty) |
Heat treatment equipment
Vacuum Furnace
Tube Furnace
Customize Furnace
Solution for Ultra Hard Tools
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools