PRODUCT

0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER

Ask for a free consultation Ask for technical support

Home > Products > Heat treatment equipment > Tube Furnace > Inclined rotary tube furnace

model:PT-R1500-S40-SZ

Customized rotary tube furnace

Application

Contact us for customize send-email: info@lab-furnace.com

Detailed Parameters Of The Product

A brief description: This customized rotary tube furnace is a customized rotary furnace that integrates a high temperature zone and a sublimation zone. After sublimation in the sublimation zone, the material can be carried by the carrier gas to the high temperature zone for reaction, and the furnace tube can be rotated 360° when the instrument is running. Mainly for the mixed firing of powder, it can be used in a variety of powder...

Main purpose: mainly for the mixed firing of powders, and can be coated on the surface of a variety of powders.

Product introduction:
This equipment is a customized rotary furnace integrating high temperature zone and sublimation zone. The material can be carried by carrier gas to the high temperature zone for reaction after sublimation zone, and the furnace tube can be rotated 360° when the instrument is running, mainly for For the mixed firing of powders, it can be coated on the surface of a variety of powders.

Technical Parameters:

product name	Customized rotary tube furnace
Product number	PT-R1500-S40-SZ
High temperature zone
Furnace material	High quality alumina fiber
Heating element	High quality silicon molybdenum rod
Limit temperature	1600°C
Operating temperature	≤1500℃
Heating rate	0-10℃/min
Heating temperature zone	Single temperature zone temperature control, multi-stage "time-temperature curve" can be set
The length of the heating zone is about	200mm, 300mm, 400mm optional
Temperature measuring element	Type B thermocouple
Furnace tube material	High purity corundum tube
Outer diameter of furnace tube	30mm, 50mm, 60mm, 80mm optional
Low temperature zone (materials sublimate at 500 degrees)
Furnace material	High quality alumina fiber
Heating element	High-quality resistance wire
Limit temperature	600°C
Operating temperature	≤500℃
Heating rate	0-10℃/min
Heating temperature zone	Single temperature zone temperature control, multi-stage "time-temperature curve" can be set
The length of the heating zone is about	200mm, 300mm, 400mm optional
Temperature measuring element	K-type thermocouple
Vacuum pump (optional)	Rotary vane pump for pre-evacuation
Power supply	220V 50Hz
The power of the whole machine is about	8KW
More specifications can be customized according to requirements