Detailed Parameters Of The Product
Description:eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
The PCD Inserts can be used in many fields including aviation, the car industry, energy equipment, and the wood and stone industry. It can be used to cut and process different materials such as aluminum,copper, aluminum/gray iron composites, as well as nonmetallic materials such as wood,chipboard,ceramics,plastic,rubber etc,where high abrasion resistance and good surface finish are requried.eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
Features:eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
1. The PCD insert meets the international standard of ISO.eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
2. High abrasive resistance, high processing precision, good thermal conductivity and long service life.eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
3. The PCD insert cutting edge is sharp, it can realize high speed cutting and hard material cutting with high work efficiency and facilitate fast clamping.eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
4. It can be used repeatedly, which helps to lower your processing cost.
![PCD Inserts](/d/file/uploads/190612/1-1Z612144416243.png)
![PCD Inserts](/d/file/uploads/allimg/190612/1-1Z6121444401c.png)
Technical Parameter:eFrMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
Insert Type |
PCD Inserts |
Workpiece Materials |
Aluminum & Aluminum alloy |
Non metal |
Tungsten carbide |
Cutting Speed (m/min) |
200-3000 |
100-500 |
20-30 |
Feeding Rate (mm/rev) |
0.05-0.5 |
0.05-0.5 |
0.05-0.2 |
Cutting Depth (mm) |
0.05-1.0 |
0.05-1.0 |
0.05-0.2 |