NEWS

EXPLORE THE NEW TRENDS AND ADVANCED TECHNOLOGIES IN THE HEAT TREATMENT EQUIPMENT INDUSTRY

Ask for a free consultation Ask for technical support

Home > News

Installation method of tube furnace

The installation method of the vacuum tube furnace is as follows:
Electrical Installation

   Power configuration: 220V (380V). According to the user's electric control cabinet configuration power should be greater than 4Kw.

   The thermocouple is inserted into the furnace with a depth of 25mm, and is connected with a temperature control instrument with an N-gradient compensation wire. Note: The quartz tube should be installed first and then the thermocouple. The thermocouple should not be in contact with the quartz tube. The electric furnace and the control cabinet are grounded as a whole, and the grounding resistance of the grounding wire should be less than 4Ω.

   Resistance wire connection mode: two wires in parallel, power supply: single-phase 220V (or 380V).

Furnace installation

   The electric stove can be placed on the workbench to suit the physiological operating height of the human body. The effective load of the workbench should be greater than 200KG.

   Check and tighten
   Due to transportation and other reasons, check the fastening of each screw of the furnace body to confirm that it is correct.

Pre:Tube furnace manufacturer introduction
Next:How to use tube furnace?