Name | 1000℃ Vertical tube furnace |
Furnace tube size | Ø60mm(Outer diameter) |
Furnace tube length | According to the final design |
Furnace door structure | Openable |
Furnace shell material | Stainless steel |
Length of heating zone | 400*400mm |
Cooling zone | 200-600mm(According to the final design) |
Furnace tube material | 310SStainless steel |
Normal working temperature | ≦1000℃ |
Heating rate | 0-10℃/min |
Furnace material | Alumina polycrystalline fiber |
Temperature control method | Intelligent 30-segment programmable control, independent temperature control for each temperature zone |
Constant temperature accuracy | ±1℃ |
Heating element | Resistance wire |
Operating Voltage | AC 220V single phase 50HZ |
Maximum power | According to the final design |
Thermocouple layout | T1: Arranged in the furnace of temperature zone 1 to monitor the temperature of the furnace T2: Control the gas temperature at 400C T3: Arrange in the hearth of temperature zone 2 to control the temperature of the hearth T4: The load thermocouple is arranged on the top and can be placed inside the crucible to measure the temperature of the material |
Gas preheating structure | Part of the furnace tube in the first temperature zone is wrapped with a stainless steel coil, and the carrier gas enters the second temperature zone from the coil to ensure that the gas is fully preheated (specifically subject to the final design) |
Inlet and outlet structure | KF25 to 1/2" card sleeve outer wire interface |
Lifting structure | The top of the furnace tube is designed with a sealed lifting structure, when the material needs to be heated, the material can be lowered to the temperature zone 2, and after the heating is completed, it is lifted to the cooling zone |
Flange joint | Standard configuration is equipped with two stainless steel vacuum flanges, mechanical pressure gauge and stainless steel globe valve have been installed |
We provide 24/7 hours global online service, one-stop customized service, welcome to consult.