Model |
Round Disc and Ring Cutter Set for Metallic Sheet upto 1.29mm ThickR4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
( Optional Metric or Imperial ) - MSK-T-09 |
Cutting Dies |
10 cutting dies are included for immediate use. Please choose Metric or Inch from optional barR4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
-
Metric Size: 3mm, 6mm, 10mm, 13mm, 16mm, 20mm, 22mm, 25mm, 28mm and 32mm
-
Imperial Size: 1/8", 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8'', 1'', 1- 1/8'' and 1-1/4" (1/8" increments)
|
Center-Positioning Dies |
A set of positioning dies are included for your to cut out the metal rings |
Cutting Thickness |
This disc cutter is suitable for punching soft gold, silver, copper and brass in thicknesses up to 1.29mm.R4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
Note: it is not suitable for cutting thin plastic foil, such separator of battery |
Warranty |
One year limited manufacture warranty with lifetime supportR4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
(*Rusted and damaged parts due to improper storage condition or maintenance are R4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
not covered by warranty) |
Application Notes |
It is suggested to use a urethane square (1/16" thick, 95 durometer; not included) underR4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
the cutters as a support as you cut; the urethane abR4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
sorbs the energy of the hammer blow, protecting the cutters and the work surface andR4yMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
ensuring a clean, sharp cut. |
Net Weight |
10 kg (20 lbs) |