Zhengzhou Protech
Home > News

Help you understand the vacuum hot pressing sintering furnace

      Many people don't know much about the vacuum hot pressing sintering furnace. Its characteristic is the natural air insulation type, which is light and easy to handle. Fast heating, 0-30℃/min can be set freely.

      The high temperature furnace is heated by radiation on both sides of the furnace, and the temperature distribution is more uniform.
vacuum hot pressing sintering furnace
Insulation: Imported high temperature resistant ceramic wool insulation and ceramic board, rock wool triple insulation, etc.

Heater: The heater is durable, stable in heating, and fast in heating.

The interior is made of high-temperature resistant ceramic plates, which are not easily deformed, and the exterior is galvanized and high-temperature baking paint is beautiful, and the paint is not easy to fall.

Specifications are: 1000℃, 1200℃, 1300℃, 1600℃, etc.,

Special specifications can be customized according to user needs.

Temperature rise fast: 1000C furnace type from 100C to 1000C, less than 30 minutes

1700 degree furnace 100C to 1700C, less than 90 minutes

High efficiency: When used as an experimental furnace, the air inlet and outlet can be opened, and the chimney can be added, which is beneficial to supplement fresh oxygen and accelerate the test.

Due to the new ceramic fiber furnace, the heat preservation effect is good, the temperature is raised to 1000C, and the surface of the shell is not hot after 1 hour to avoid scalding. (About 45-55C depends on the use environment)

Can significantly reduce the sintering temperature, the maximum range can reach 500. C;

Significantly reduce energy consumption, energy saving up to 70 -90%;

Shorten the sintering time, up to 50%;

Significantly increase the density of the organization, refine the grain, and improve the material properties. For specific details, please contact our professional customer service staff