Detailed Parameters Of The Product
Four-channel tube furnace has a furnace tube diameter of 100mm, which can be used for high-throughput sintering. The maximum temperature can reach 1200 degrees. Each heating module has an independent temperature control system.Each furnace tube adopts a vacuum-sealed flange It is airtight and can hold 4 samples at the same time for heat treatment at different temperatures under vacuum or atmosphere protection. It occupies a small area and has low energy consumption. It is an ideal product for high-temperature sintering and quality inspection in universities, scientific research institutes, and industrial and mining enterprises.Belonging to a type of Multi-zones Tube Furnace.
|Four-channel tube furnace
|Alumina refractory fiber
|Temperature Control System
|30-segment programmable automatic control in PID mode for each channel; (touch screen integrated control is also optional)
|Temperature control accuracy
|0~10 ℃ / min
|With over-temperature and broken couple alarm function
|Furnace tube size per channel
| Φ100mmX1000mm subject to actual needs
|heating zone per channel
|Heating zone length 400mm
|Vacuum Sealing System
|Each channel is equipped with a set of stainless steel vacuum sealing flanges
|High resistance electric heating alloy wire
|AC 380 50 Hz
|Maximum power approx.
|Temperature measuring element
|K-type thermocouple temperature measurement, each channel thermocouple, to achieve ready temperature measurement and control
|High-purity quartz furnace tube
|The pressure in the furnace tube should not be higher than 0.02MPa.
Due to the high internal pressure of the gas cylinder, when the gas is passed into the furnace tube, a pressure reducing valve must be installed on the gas cylinder to make it safer to use.
When the furnace is at high temperature, the furnace tube cannot be in a vacuum state, and the air pressure in the furnace tube must be equal to the atmospheric pressure and kept at normal pressure