Detailed Parameters Of The Product
Description:
It is designed test various electrodes easily and quickly by providing the user a structure to simulate assembled coin cells without the need to crimp actual coin cell cases. Two sides of the test cell connect to both electrode (the anode and cathode), with the middle being connected to the reference electrode which can be used for monitoring voltage variations of the two electrodes. This test cell can accept 15 mm diameter electrodes and 24mm separators.
Structure |
Full stainless steel SS304 |
Max.Cell Thickness |
6mm (cathode+separator+anode) |
Features |
24 mm diameter insert
Silicon O-ring in between the three plates to ensure a good sealing up to a temperature of 250 °C
Adjustable spring tension on top to accept various electrode thicknesses
Easy to separate after testing
Small enough to be put into and taken out from a glove box
Needle valve with 1/4" pipe adapter |
Pressure Range5 |
-30" Hg to 0 and to 100 psi (Vacuum to Atmosphere and to Positive Gas Pressure) |
Digital Pressure Gauge |
1/4NPT fitting
|