model:PT-M1200
Dewaxing Box Furnace
Application: Debinding Furnace for 3D printing materials. The furnace adopts the heating method of external resistance wire, which makes the furnace temperature more uniform and easier to replace the heating element. There is a blower below the chamber of furnace, pipes for purging the gas in the furnace , and there is a chimney on the top of furnace to discharge the flue gas during the heating process.
Contact us for customize
send-email:
info@lab-furnace.com
Detailed Parameters Of The Product
product description:
Debinding Furnace for 3D printing materials. The furnace adopts the heating method of external resistance wire, which makes the furnace temperature more uniform and easier to replace the heating element. There is a blower below the chamber of furnace, pipes for purging the gas in the furnace , and there is a chimney on the top of furnace to discharge the flue gas during the heating process.
Model |
PT-M1200 |
chamber size |
Width 400* Height 400* Depth 400 |
Power supply |
380V, 50Hz, three-phase. |
power |
by actual |
Heating element |
Resistance wire |
Heating rate |
10 C/min |
Thermocouple |
Type K |
Temperature Controller |
standard |
special requirements |
There is a blower under the box, a porous ceramic tube in the furnace to blow fresh air, and a chimney on the top of the furnace to exhaust smoke Grind the following sizes with 1700 electric furnace lining material alumina fiber: 23*11*2cm 5pcs 6.5*23*2cm 10pcs 23*11.5*6.5cm 2 2*5*25 cm 10 2*25*25 cm 5 |
After-sales service |
12 months warranty, lifetime warranty (except wearing parts) |
More specifications can be customized according to customer needs