-
-
Vacuum Furnace
-
Tube Furnace
-
Box Furnace
-
Customize Furnace
-
Accessory For Heating Treatment Equipment
Heat treatment equipment
-
-
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools
Solution for Ultra Hard Tools
product description:
PT-M1700-12LC is a CE certified high temperature box furnace, with silicon molybdenum rod as heating element, thyristor and unique touch screen system to make the control more precise and the graphical interface more convenient. The maximum temperature of the furnace is 1700 ℃. The inner furnace surface is coated with a high temperature alumina coating, which can improve the reflectivity and the heating efficiency of the equipment, and can also prolong the service life of the instrument.
technical parameter:
PT-M1700-12LC is a CE certified high temperature box furnace, with silicon molybdenum rod as heating element, thyristor and unique touch screen system to make the control more precise and the graphical interface more convenient. The maximum temperature of the furnace is 1700 ℃. The inner furnace surface is coated with a high temperature alumina coating, which can improve the reflectivity and the heating efficiency of the equipment, and can also prolong the service life of the instrument.
technical parameter:
Model | PT-M1700-12LC |
Effective size | 200*200*300mm |
Furnace material | Alumina refractory fiber |
Operating temperature | Long-term less than or equal to 1600 ℃; maximum temperature: 1700 ℃ |
Temperature control method | Adopt touch screen controller, intelligent 30-segment programmable control |
Recommended heating rate | 0--10℃/min |
Temperature control accuracy | ±1℃ |
Heating element | Silicon molybdenum rod |
Thermocouple | Type B |
shell structure | Double-layer air-cooled electric spray structure |
Furnace door opening method | side opening |
Operating Voltage | 220V 50HZ/60HZ |
Maximum power approx. | 6KW |
delivery | 1 door plug, 1 crucible pliers, 1 pair of high temperature gloves, 1 copy of the instruction manual |
Certification | CE、ISOCertification |
Optional | Spare silicon molybdenum rods, crucibles, computer temperature control software, etc. |
Precautions | 1. In order to prolong the life of furnace components, it is recommended that the heating rate should not exceed 10℃/min. 3. The furnace has no vacuum tightness, and it is forbidden to introduce toxic or explosive gases. 4. Small cracks may appear on the surface of the furnace after a period of use. This is a normal phenomenon and does not affect normal use, and cracks can be repaired with aluminum oxide coating. |
Warranty | One-year warranty (except for consumables and man-made damage), lifetime technical support. Special Note: 1. Consumables such as heating elements, quartz tubes, sample crucibles, etc. are not included. 2. Damage caused by the use of corrosive gas and acid gas is not covered by the warranty |