SCR, DPF (environmental protection) box type regeneration furnace product introduction:
DPF regeneration technology is to place the ceramic filter and its accessories in the heating chamber and heat it to 550-600 ° C, so that the urea crystal is decomposed and ashed by heat, and other particles are loosened by heat; Removes particles from the pores and restores the ceramic filter to its original state.
When choosing SCR and DPF (environmentally friendly) regeneration furnaces, it is necessary to comprehensively consider furnace size, temperature, temperature uniformity, environmental protection and other issues.
The SCR and DPF (environmental protection) regeneration furnaces produced by Protech company. are energy-saving, environmentally friendly, rapid in temperature rise, uniform in temperature, good in heat preservation effect, and competitive in price. They are the wise choice for SCR and DPF (environmental protection) regeneration furnaces.Industry application:
This furnace type is a special furnace type developed for SCR and DPF (environmental protection) regeneration technology. It is suitable for the environmentally friendly regeneration of SCR and DPF in automobile parts manufacturing, sales and maintenance enterprises.The main parameters
|SCR, DPF (environmental protection) box type regeneration furnace
|The molybdenum-containing alloy heating wire is wrapped around the corundum tube and hung on the left, right and rear sides of the furnace for heating, and the heat dissipation is more sufficient
|Aluminum silicate fiberboard + mullite light refractory brick. The bottom and furnace mouth are made of mullite light refractory brick, which is strong and wear-resistant, and durable; other parts use aluminum silicate fiberboard, which has high heat reflectivity, low heat loss, energy saving and efficiency improvement.
|Temperature measuring element
|K-type thermocouple, good linearity, large thermoelectromotive force, high sensitivity, good stability and uniformity, strong anti-oxidation performance
|Temperature Control System
|Adopt PID method to adjust temperature control, can set 30 steps of heating and cooling program, temperature control accuracy ±1℃, with over-temperature protection, broken couple protection function (optional LCD touch screen, with simple and intuitive interface, convenient and easy to use, paperless recording , can be connected to a computer, etc.)
|720*660*720mm(W*H*D), you can put a set of DPF filters, accessories and brackets as a whole, or you can put 8 ceramic filters at the same time
|How to open the door
|Open the door on the side; a ring of ceramic fiber cotton is pasted on the furnace door to prevent heat, gas and particles from escaping along the gap
|2 types, top and bottom structure and left and right structure, the top and bottom structure is that the heating chamber is above and the electrical and control system is below, and the left and right structure is that the heating chamber is on the right and the electrical and control system is on the left. There are 4 load-bearing wheels installed under the furnace body, 2 of which are universal wheels with brakes, which are convenient for the furnace to move and can fix the position during use.
|air inlet and outlet
|An exhaust hole is set in the middle of the top of the heating chamber to facilitate the discharge and collection of exhaust gas and particulate matter during the heating process