PRODUCT

0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER

Ask for a free consultation Ask for technical support

Home > Products > Other Lab Equipment > Battery Equipment

model:MSK-HRP-MR100A

Electric Precision 4＂ Width Rolling Press with Dual Microme

Application

Contact us for customize send-email: info@lab-furnace.com

Detailed Parameters Of The Product

Application:
MSK-HPR-MR100A (upgrade from EQ-MR100A) is a CE Certified compact precision electric rolling press. It has dual rollers of 100 mm dia. x 100mm width and dual grade micrometer. It is an ideal rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying

Technical parameters:

Model

Electric Precision 4" Width Rolling Press with Dual Micrometer - MSK-HRP-MR100

Working Voltage

110V / 220V AC single phase selectable
220V AC Power plug is not included.

Max. Power Consumption

500W Total

Structure

Heavy duty steel frame, gears and handle
100 mm Dia. x 100mm width Rollers made from hardened tool steel (RC > 62) with Cr electroplated coating
Dual micrometer for accurate thickness adjustment in the range 0 - 1.8 mm Maximum

Roller

Dimensions: 100mm(Dia.) x 100mm(W)
Material: Made from hardened tool steel (RC > 62) with Cr electroplated coating
Power: Driven by 0.5 HP high touqe gear AC Motor
Constant Rolling Speed: 65 mm / second

Product Dimensions

381 mm(L) x 241.3mm(W) x 355.6mm(H) (15" x 9.5" x 14")

Compliance

CE Certified

Warranty

One year limited manufacture warranty with lifetime support
Rusting and damage due to improper storage condition or maintenance is not covered by warranty

Application Notes

The MSK-MR-100A roller is specially designed for battery R&D in terms of its advantages as affordable, compact and precise. Please strictly follow the instructions during operation
Must use acetone to clean and dry rollers' surfaces after each use to avoid rusting
Apply antirough if machine were to be unused for a long period of time
Never roll materials with hardness > 50HRC
The minimum thickness of the rolled sheet should depend on the physical property of the materials. Here are some results from our test:

Electrode	Size	Original thickness	Finished thickness
LiFePO4 double sides	50mm Width x 260mm Length	0.205mm	0.09mm
LiMn2O4 double sides	50mm Width x 260mm Length	0.205mm	0.09mm
Copper foil + graphite (single side)	75mm Width x 240mm Length	0.09mm	0.04mm