PRODUCT

0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER

Ask for a free consultation Ask for technical support

Home > Products > Other Lab Equipment > Sample Preparation >

model:SYJ-40-LD

High Speed Diamond Cut-off Saw with Vise and 5 pcs 4＂ diamo

temperature:
- 1200
- 1400
- 1700
chamber size:

Contace us for customize send-email: info@lab-furnace.com

Detailed Parameters Of The Product

Application:
SYJ-40 is a 4" Manual Cut-off Saw and is the perfect tool for cutting valuable materials quickly, such as rough crystal, ceramic, metal rod and almost any material before lapping and polishing.

Technical parameters:

Power	Voltage: 110V AC 50/60hz
Motor & Spindle	The 1/4 HP equivalent variable speed ball bearing direct drive motor allows the saw to run fast enough to use ultra thin diamond blades Speed varies from 400 to 3250 RPM.
Saw Table & Housing	The saw table is flat so it is easy to trim oversized slabs and removable so clean up is easy. Max. sample loading length: 6" The sturdy table measures 6" X 10", easy to operate. The saw housing is made of unbreakable cross-linked polyethylene - no rusting, no messy oil, uses water only.
Cutting Blade	Max. cutting depth: 1" (25.4 mm). Max. cutting length: 40mm Comes with 5 pcs of impregnated diamond blade of 4" Dia x 0.014" (0.35 mm) thickness x 1/2" arbor, as well as a vise which allows you to handle the sample smoothly. For longer cutting life, please use sintered diamond blade ( please click picture below righ -1 to order at extra cost )
Shipping Dimensions	16" x 13" x 11”
Shipping Weigh	16lbs
Warranty & Compliance	Two Years limited warranty CE certified
Application Notes	Please note that this manual cut-off saw is mainly for fast cutting materials. For more precise cutting, please select our precision low speed diamond cutting saws