model:MSK-T-10
Compact & Precision Disc Cutter with Standard 16, 19, 20
Application: Widely used in geology, minerals, metallurgy, electronics, building materials, ceramics, chemicals, light industry, medicine, environmental protection and other departments. It is an ideal equipment for scientific research, experimental production and material research.
Contact us for customize
send-email:
info@lab-furnace.com
Detailed Parameters Of The Product
Application:LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
MSK-T-10 is a compact disc cutter with quality sliding rail with ball bearing for precision cutting. It can be easily placed into a glove box with a transition chamber diameter larger than 230mm. This tool is manually operated and is designed for cutting round discs from thin metal sheet/foil (< 0.5 mm) or separator film (<30um). The resulting discs can be used as electrode/separator discs of split test cell and coin cell for battery researches as well as TEM sample preparation.LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
Technical parameters:LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
|
Structure |
Major structural material: Cr Plated Steel |
|
Cutting Die |
-
16, 19, and 20mm precision dies are included in standard package
-
Optional 3 - 24mm customized dies are available upon request at $599.00/each, 4-6 weeks lead time
|
|
Product Dimensions |
-
209mm(L) x 120mm(W) x 394mm(H)
-
Compact size which can be put into glovebox through air lock chamber
|
|
Warranty |
-
One year limited manufacture warranty with lifetime support
-
Rusting and damage due to improper storage condition or maintenance is not covered by warranty
|
|
Application Notes |
-
If you are going to make CR2016, CR2025 or/and CR2032 coin cell batteries, you will need at least three cutting dies:
16mm (for negative side case, which is 16.5mm in diameter)LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
19mm (for positive side case, which is 20mm in diameter)LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
20 mm (for separator to fully separate the electrodes in both negative and positive cases)LFZMuffle Furnace,Tube Furnace,Vacuum Furnace,Atmosphere Furnac
-
For CR2450 coin cells, a 20mm cutting die can be used for cutting electrode discs and the 24mm cutting die can be used for cutting either electrode discs or separator discs (the 24mm cutting die can be purchased as optional die)
-
Separator discs must be large enough to fully separate the positive and negative electrodes to avoid short-circuit inside the coin cells
|
|
Net Weight |
10 kg (22 lbs) |
English
简体中文
Français
日本語
한국어
Português
Русский
Español
