High Energy Micro-Vibration Mill and Homogenizer with Zircon_Muffle Furnace_Vacuum Furnace_Dental Furnace_Tube Furnace

Home > Products > Other Lab Equipment > Sample Preparation >

model:MSK-SFM-12M-LD

High Energy Micro-Vibration Mill and Homogenizer with Zircon

temperature:
- 1200
- 1400
- 1700
chamber size:

Contace us for customize send-email: info@lab-furnace.com

Detailed Parameters Of The Product

Application:
MSK-SFM-12M is a high energy Micro-Vibration Mill & homogenizer that sets the performance standard for small quantity milling and mixing. Simultaneous homogenization of up to 3 samples at 2 ml tube takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The optimized mixing motion causes rapid milling through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type. Developed for samples too tough to be homogenized in a common lab vortexer, MSK-SFM-12M provides a convenient and economical alternative to the traditional, over-priced homogenizers on the market today.
Technical parameters:

Working Voltage	110 - 240VAC 50Hz, US plug (208-240VAC version will included 60W transformer at $10 extra cost)
Vibration Speed	2700 to 4000 rpm adjustable
Timer	0 -- to 60 minutes adjustable
Capacity	3 x 2.0ml tube can be loaded on the device simultaneously
Tube	6 Prefilled Tube Kits and 4 empty tube kits (non-skirted with caps)
Grinding media	Three types of PureHigh Impact Zirconia Beads are included for rapid milling Ø0.5mm (0.5g) & Ø1.5mm (0.5g) & Ø3mm (1g) Zirconia Beads Extra zirconia ball is available upon request at extra cost
Dimensions	6.9 x 8.3 x 5.3 in. 17 x 21 x 13.5 cm
Net Weight	5 lbs / 2.2kg
Warranty	Two years limited warranty with lifetime technical support

STANDARD PACKAGE

No.	Name	Qty.
1	MSK-SFM-12M Milling Machine	1
2	2ml tube	10
3	Backup screw	1set
4	Spring	2
5	Fuse	1
6	Ø1mm Milling Media ball	Total 0.5g
7	Ø1.5mm Milling Media ball	Total 0.5g
8	Ø3mm Milling Media ball	Total 1g