Zhengzhou Protech
Zhengzhou Protech
Home > Products > Heat treatment equipment > Box Furnace > Crucible Furnace
Crucible furnace
model:PT-M1700-C

Crucible furnace

    Application:  Protech PT-M1700-C crucible furnace the Max. Temperature can reach to 1700C. And it is mainly used for the calcination of high pure compound in the vacuum or inert atmosphere, sintering or spread of semiconductor film, sintering of ceramic material, etc.
Contace us for customize send-email: info@lab-furnace.com
Zhengzhou Protech Zhengzhou Protech
Detailed Parameters Of The Product
Brief Introduction:  
Protech PT-M1700-C crucible furnace the Max. Temperature can reach to 1700C. And it is mainly used for the calcination of high pure compound in the vacuum or inert atmosphere, sintering or spread of semiconductor film, sintering of ceramic material, etc.

The main features are as below: 
1. High uniform temperature.
2. Temperature Control Accuracy:±1℃
3.Easy to operate.
4.Over temperature protection and alarm.

Technical Parameter:
1 Chamber Structure Cylinder type(no crucible)
2 Display LED
3 Max. Temperature 1700℃
4 Continuous working Temperature ≤1600℃
5 Heating Rate Max.0-20℃/min(Suggestion 0~10℃/min)
6 Temperature control accuracy ±1℃
7 Inside Chamber Size φ200XH350mm
8 Heating Element MoSi2 rods
9 Thermocouple B Type
10 Max. Power 5.0KW
11 Working Voltage AC 380V, three-Phase 50Hz
12 Temperature Control PID automatic control via SCR power control
13 Heating curves 30 steps programmable
14 Chamber material Alumina Fiber
15 Furnace sealing High temperature silicone rubber seal and vacuum flange
16 Limited vacuum degree -0.1Mpa
17 Warranty One year limited warranty (Consumable parts such as heating elements are not covered by the warranty)
 

Product

Zhengzhou Protech

After-sales serveces

After-sales serveces
livechat